This is the proper procedure from SeaDoo Engineering on how to flush a SeaDoo with two flush ports. The right hand (Starboard) flush port, flushes the intercooler, which is the main difference in this model and the older, single flush port models. (If you ride in salt water, you will want to use Salt Away to flush through the engine and to wash the ski down. I only use this ski in fresh water, so that was not included in the process.) Please note that the actual procedure published by SeaDoo comes up on the screen at the end of the video.

Do not run your engine for more than 2 minutes out of the water. Each flush port requires approximately 1 minute per side. Running for too long can damage the carbon seal, causing the craft to take on water. DR Cars & Life is not responsible for any damage caused to your craft as a result of watching this or any of our other videos.

Music: Sticky Stuff, by Avocado Junkie

0:00 - Intro
0:45 - Tools Needed
0:58 - Hooking up the water hose and flushing
2:45 - PDF of Flushing procedure
2:55 - Outro

свернуть