Description：
This horizontal type fiber optic curing oven is designed for curing MT ferrule or assembled SC/FC/ST/LC/MU/SMA905 connector’s epoxy, and can also curing 2.50mm/1.25mm/3.17mm bare ferrule. Constant temperature design, accurate temperature control. The external protective cover plate makes the oven safe and reliable.
Key Features:
》 It is specially designed for curing MT/MPO/MTP ferrule’s epoxy. 18-24 cores can be cured at one time.
》 It can also be used to cure the assembled SC/FC/ST/LC/MU/SMA905 connector’s epoxy, cure 18 pieces of connectors at one time.
》 The heating board is replaceable, the 2.50mm/1.25mm/3.17mm bare ferrule can be cured, 36 ceramic ferrule can be cured at one time at most.
》 The temperature of 40-200 ° C can be adjustable, and the curing temperature is controlled by intelligent constant temperature, with a small temperature fluctuation of+/- 1 ° C.
》 Built in timing unit, and buzzer will alarm and remind when timing is over.
》 The MT ferrule shall be placed horizontally and solidified to prevent epoxy overflow.
》 External protective cover can effectively avoid scalding and heat loss
