FACTORY RISER BLOCKS AVAILABLE FROM KELLENBERGER

TO INCREASE THE SWING OF THIS MACHINE TO 19- 5/8"

(250mm CENTER HEIGHT) - KELLENBERGER PART #KB-0107211



MODEL: 600U S/N: 32.465 2799 NEW: 1986







HEIGHT OF CENTERS, AS PRESENTLY CONFIGURED ..... 9.8"

MAXIMUM SWING WITH FACTORY RISER BLOCKS ........ 19- 5/8"

DISTANCE BETWEEN CENTERS (NOMINAL).............. 23- 5/8"

DISTANCE BETWEEN CENTERS W/TAILSTOCK

OVERHANGING .................................. 29- 1/2"



TABLE:

LONGITUDINAL TABLE TRAVEL ...................... 35- 1/2"

LONGITUDINAL TABLE TRAVEL PER TURN OF HANDWHEEL:

COARSE ....................................... 25/32"

FINE ......................................... 3/32"

LONGITUDINAL TABLE SPEED (HYDRAULIC) ........... 0.06 TO 18' FPM

TABLE SWIVELS .................................. 11 DEGREES

REVERSING DWELL ................................ 0 TO 5 SECONDS

GRINDING WHEEL INFEED:

1 GRADUATION OF FEED SCALE ................... 0.0002"

AUTOMATIC FEED, MAXIMUM ...................... 0.035"

AUTO. INFEED PER TABLE REVERSAL .............. 0.00005" TO .0012"

INFEED FOR PLUNGE GRINDING ................... 0.00004" TO .002"

PLUNGE GRINDING: INFEED SPEED ................ 10 TO 1000 uIN/SEC

MICROMETER STOP, 1 GRADUATION ................ 0.00005"



UNIVERSAL GRINDING SPINDLE HEAD:

TRANSVERSE MOVEMENT OF WHEEL SLIDE ........... 11-1/4"

HYDRAULIC RAPID WHEEL SLIDE ADVANCE/RETRACTION

STROKE ...................................... 1-9/16"

GRINDING WHEEL SPEEDS (4) .................... 1500, 1700, 2200 & 3600 RPM

GRINDING WHEEL FOR CYLINDRICAL

GRINDING .................................... 16" X 2" X 5"

GRINDING WHEEL (SURFACE GRINDING) ............ 10" X 3/4" X 3"

SWIVEL OF GRINDING HEAD W/LOCKING EVERY

90 DEGREES .................................. 270 DEGREES





WORKHEAD:

INFINIT. VARIABLE SPINDLE SPEEDS ............. 10 - 400 RPM

WORKHEAD SWIVELS ............................. 360 DEGREES

INSIDE TAPER OF WORK SPINDLE ................. #5MT



APPROXIMATE FLOOR SPACE REQUIRED ............... 102" X 64" X 66"H

APPROXIMATE MACHINE WEIGHT ..................... 6,000 LBS



MACHINE FEATURES:

HYDRAULIC OPERATION FEATURING:

-SINGLE LEVER CONTROL

-INFINITELY VARIABLE TABLE TRAVERSE

-AUTOMATIC INFEED

-PLUNGE INFEED

-RAPID WHEEL ADVANCE & RETRACTION

SPARKOUT TIMER

DUAL LEFT-HAND (O.D.) & RIGHT-HAND WHEEL MOUNTING

(FACE GRINDING) WITH SWING AROUND I.D. GRINDING UNIT



EQUIPPED WITH:

-THREE WHEELHEAD MACHINE .... O.D./I.D/AND FACE GRINDING

CAPABILITY. FACE GRINDING SET-UP IS NOT EQUIPPED

WITH THIS MACHINE, BUT IS AVAILABLE FROM KELLENBERGER.

-CURRENTLY SET-UP AS 9.8" SWING, AND THE CAPACITY

CAN BE INCREASED TO 19- 5/8" MAX. SWING

.... SEE INFO ABOVE & BELOW ON QUOTATION

-SWING AROUND INTERNAL GRINDING ATTACHMENT

-FORTUNA I.D. SPINDLE, TYPE FIV 50R315, 24,000 MAX. RPM

-"MARPOSS" E5" IN-PROCESS AUTOMATIC GAUGING

-HYDRAULIC TAILSTOCK

-FINE TAPER ADJUSTMENT AT THE TAILSTOCK

-DIAL INDICATOR WITH ASSEMBLY FOR TABLE TAPER ADJUSTMENT



STANDARD WORKHEAD W/DUAL LIVE & DEAD WORKHEAD SPINDLE

4 H.P. WHEELHEAD MOTOR

COOLANT SYSTEM

3/60/230-460 VOLT ELECTRICS

MACHINE IS WIRED FOR 460 VOLTS





SPECIAL NOTE:

FACTORY RISER BLOCKS AVAILABLE FROM KELLENBERGER TO

INCREASE THE SWING OF THIS MACHINE TO 19- 5/8"

(250mm CENTER HEIGHT) - KELLENBERGER PART #KB-0107211





** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

** ORIGINAL PAINT, ALL ORIGINAL "SWISS" MACHINE **

свернуть