This is my Astron RS-20M 12 volt (13.8) 20 amp power supply that I picked up used a few years ago. It has started shutting down with a over voltage issue. I determined the output transistors were the issue.
If you would like to support my video efforts please consider making a donation at [ Ссылка ] Remember with your help we can keep these things out of the landfill, out of the recycle bin, and out of the E-waste facility! Thanks for watching.
Thank you to these people that have supported my channel by making a donation or by having me repair their unit.
Dave Kirkey Paul Gates Christian Brenzel Kitty Zeisloft Darin Enck Clarkie Kay Philip Brown (Thank you for monthly support) Rich Doza Michael Mazer Mike Bale David Arballo Richard Hudson Karen Shegog Rudy Kraker Dan Latorre Jim Louderback Justin Tuhua Cynthia Adams John Roach John Quinn Ashley Silas Sherri Parsons Jim McCarthy David Arballo Steve Navarro Keith Claro Frank Conlon Graham Foral Bob Hendrix Jim Meschler David Jacobson Randy Fink Scott Kullen Obaid Khan Robert Brothers Timothy Edds Brian Gay Owen Flint Dana Dainels Tyler Bridge Dena Hamilton Paul Agbuya Samuel & Nancy Guich Dot Morgan Timothy Ritchel William Holloman Cynthia Adams Andrew Oros George Savage Graham Foral Paul Agbuya Scott DuVall Christian Brenzel Russell Houtz Philip Brown Michael King Erick Pastor Robert Ettinger Christopher Cicero Heath Lasswell Timothy Ritchel Benjamin Rubio Michael Dukes Dot Morgan Casey Cane Teri DeLeo Kelly Knutson Howard Goble Diana Williams Reed Graham Christopher Wang David Ammerlaan John Johnson Shaheed Amirkhan Brett Sherry Joseph L Ozvold Sweidan Omar John Eggers Linda Kuo Daniel Pyles Melanie Branton Lisa Sklar Barry Marchant John Harper Larry Mcdonald Annette Lewis Howard Goble Hugo Tajimaroa M R Rajesh Uri Cohen
Follow me on social media
Facebook
Instagram
Twitter
@NORCAL715
email me NORCAL715videos@gmail.com #Norcal715Videos@gmail.com
00:00 Intro and a look around
01:33 The inside view
02:16 The schematic
03:23 The protection diode I installed
04:27 Unsoldering the base drive
04:54 Testing with base drive disconnected
05:33 Testing the old transistors
06:35 Testing with the MK-168
07:16 Testing the new transistors
07:53 Installing new transistors
09:00 Trying Super Lube heat sink compound
09:14 Testing with base drive disconnected
09:49 Cleaning the board with ACETONE!
10:10 Blocking diode addition in the 90s
11:02 Testing with full (up to 140) AC volts
12:11 Final thoughts/Closing words
