In todays video - I install the Kong Performance 2650! I had to swap the valley cover for a stock LS3 valley cover, install the bolts provided by Kong - and then I was finally able to get the blower bolted on.

Also - you need to install the oil pressure switch, the front steam ports, and the PCV hose for the valley cover before you put the blower on.

Tools/Parts Used:
LS9 2650: Kong Performance
LS9 Lid: [ Ссылка ]
LS3 Valley Cover: [ Ссылка ]
Oil Pressure Switch: [ Ссылка ]
Oil Pressure Switch Socket: [ Ссылка ]
AN fittings for Steam Ports: [ Ссылка ]
Vibrant Hose for Steam Ports: [ Ссылка ]
Map Sensor Block off plate: [ Ссылка ]
Milwaukee M18 Battery: [ Ссылка ]
Milwaukee Charger:[ Ссылка ]
Craftsman Hex Socket Set: [ Ссылка ]
Craftsman Extended 1/2 ratchet: [ Ссылка ]
Craftsman Ratcheting 12MM Wrench: [ Ссылка ]
Craftsman Socket Set: [ Ссылка ]
Milwaukee Charger: [ Ссылка ]
Milwaukee 3/8 Ratchet: [ Ссылка ]
Milwaukee 1/2 Ratchet: [ Ссылка ]
Milwaukee M12 Battery: [ Ссылка ]
Milwaukee 1/2 Impact: [ Ссылка ]
Milwaukee M18 Battery: [ Ссылка ]
Milwaukee M18 1/2 Right Angle Impact: [ Ссылка ]
Milwaukee M12 Drill: [ Ссылка ]
Milwaukee Drill Bits: [ Ссылка ]

Thanks everyone for all of your support!

Help support the channel by checking out the store:
[ Ссылка ]

Send me stuff!
Craig BonecrrusherSS
PO BOX 63
Denver, NC 28037

The Tools I Use: [ Ссылка ]
Follow me on Instagram: [ Ссылка ]
Follow me on Twitter: [ Ссылка ]
Like me on Facebook: [ Ссылка ]

This post/video contains affiliate links. As an Amazon Associate, I may receive commission from qualifying purchases made through my links.

свернуть