Function description
KNX Passive infrared presence detector for ceiling mounting
Square detection area for corridors and storage areas
Detection area with 2 individually connectable and disconnectable detection zones, each 15 x 5 m (total 30 x 5 m)
2 channel light and 2 channel presence
2 channel light C1, C2 with 2 light measurements
2 presence channels can be parametrized individually
Adaptable 2 channel light measurement
Function aura effect, switches on the lighting group when there is a person in its detection area and dims the adjacent lighting groups
Function chaser light, recognises the direction of movement of the people in the room and "predictively" switches on the adjacent lighting group
Function walking direction recognition
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function
Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Test mode for checking function and detection range
Sensitivity adjustable
Detection area can be limited using cover clip
Manual override using telegram or remote control
Parallel switching of several detectors in Master/Slave or Master/Master possible
Ceiling installation in flush-mounted socket
Ceiling installation also possible with surface-mounted frame
User remote control and management-remote control (optional)
