@MakeGold aqua regia gold recovery
Aqua regia is primarily used to produce chloroauric acid, the electrolyte in the Wohlwill process. This process is used for refining the highest quality (99.999%) gold.
Aqua regia is also used in etching and in specific analytic procedures. It is also used in some laboratories to clean glassware of organic compounds and metal particles. This method is preferred over the "traditional" chromic acid bath for cleaning NMR tubes, because no traces of paramagnetic chromium can remain to spoil spectra. While chromic acid baths are discouraged because of the high toxicity of chromium and the potential for explosions, aqua regia is itself very corrosive and has been implicated in several explosions due to mishandling.
Due to the reaction between its components resulting in its decomposition, aqua regia quickly loses its effectiveness (yet remains a strong acid), so its components are usually only mixed immediately before use.
While local regulations may vary, aqua regia may be disposed of by careful neutralization, before being poured down the sink. If there is contamination by dissolved metals, the neutralized solution should be collected for disposal.
Chloroauric acid is an inorganic compound with the chemical formula HAuCl4. Both the trihydrate and tetrahydrate are known. It is an orange-yellow solid, a common precursor to other gold compounds and an intermediate in the purification of gold metal. Both the trihydrate and tetrahydrate are available commercially.
aqua regia refine gold refining recovery 24k pure 999 fine bullion ingot gold refining recovery. Pure gold precipitate produced by the aqua regia chemical refining process.
Gold Aqua regia dissolving. Chloroauric acid. gold refining recovery. Pure gold precipitate.
