In this video I have a few brake pedals that are severely worn and are in need of a bushing to make it perfect again. I have the rotary table on the Cincinnati Milling machine and will show you how I machine the pedals to accept a new Oilite Bushing. The pedal needs to have a very rigid setup and the pedal hole needs to be machined so it is square, just as the original bore. After boring the bushing is pressed in, a grease hole drilled, reamed, and tested on the shaft to show the precise fit.
This will work on any Willys Jeep, from the MB/GPW, CJ2a, CJ3A
CJ3B, CJ5
CJ6, etc... anything with the pedals below the floor. I am sure there are many other early vehicles that can use this treatment.
