In this video we use a ProLogic L02 with a CB11 Expansion board and two swingbolt locks. The demonstration shows how to change both locks and still have all the users work with the new locks so you don't have to program the users again.
The Reset Method is listed below:
1. Press the reset button on the lock 3-4 times
2. Press the reset button and hold
3. Plug in the 4-pin cable to the lock
4. Continue to hold the reset button for 4-5 seconds
5. Release the reset button
6. Enter the supercode
7. Select the lock number you want to name the lock.
8. Test the new lock by entering any code and select the new lock number
That's it!
This procedure works for all Prologic and ScanLogic Entrypads both in multi-door and in single lock mode.
