On high speed passes, I noticed the B2 would violently shake. I surmised that the gyro gain might be set a bit high from the factory. The gyro programming card is not yet available from Motion RC but the Gyro does have a provision for a remote gain adjustment. I hooked up the gain pin to a spare channel on my receiver with a single wire (do not use a 3 conductor servo connector since the other two pins are not power but other channels).I programmed my transmitter so that the gyro gain was now controlled by a rotary knob. This is the test flight. Much better when set at about 50٪. I will conduct further tests to see if eliminating the gyro altogether is a viable option for the way I fly. I would love to remove the gyro if possible. But one step at a time!
#freewing #motionrc #b2bomber #b2spirit #b2edf
