Lincoln Electric 140HD Welder Repair

Product Link: [ Ссылка ]

In today's video I diagnose an issue with my Home Depot Lincoln Electric 140HD.

Lincoln 140HD: [ Ссылка ]
Welding Helmet: [ Ссылка ]

I've had this welder for several years now. I've run hundreds, or likely thousands of feet of flux core wire through this machine. But on a recent project it produced this horrid sound. It sounded like grounded electricity, or a significant electric load. Followed by what sounded like the fan having a clearance issue. I pulled the cover off and noticed the fan was not spinning, or spinning slower than it should. I found some wonderful diagnostic resources on the Lincoln Electric website (see below). However, the Lincoln website was not user friendly when it came to purchasing the necessary components so I chose to order those from weldingandcutting.com (see part # below). I was able to follow the diagnostic protocol from the Lincoln materials and determine that the problem was the fan and not the CPU. I have placed an order on the needed parts and will replace the fan when they arrive.

Order Parts Online:
[ Ссылка ]
Lincoln Electric 120v Fan Motor Part# S18977-12 or 9SS18977-12

Diagnostic Resources:
parts.lincolnelectric.com
All Products
Wire Feeder Welders
Weld-Pak
Weld-Pak 140HD - 11635
Service Manual
Troubleshooting Guide
[ Ссылка ]

PROBLEMS (SYMPTOMS)
The machine has output, wire feed, gas flow but NO fan.

POSSIBLE AREAS OF MISADJUSTMENT(S)
1. Possible faulty fan motor.
2. Possible faulty Control P.C. Board.

RECOMMENDED COURSE OF ACTION
1. Perform the Fan Motor Test.

FAN MOTOR TEST

TEST DESCRIPTION
This test will determine if the Fan Motor is receiving the correct voltage.

MATERIALS NEEDED
Miscellaneous Hand Tools
Volt/Ohmmeter

PROCEDURE
Procedure Steps:
1. Remove the input power to the machine.
2. Perform the Case Cover Removal Procedure.
3. Locate the fan terminals on the Control board B1 and B4. See Wiring Diagram. See CONTROL BOARD LEAD LOCATION(S).
4. Turn machine on to conduct voltage test.
WARNING:
Type of Hazard: ELECTRIC SHOCK can kill.
How to avoid:
Have an electrician install and service this equipment. Turn the input power OFF at the fuse box before working on equipment. Do not touch electrically hot parts. Turn the machine OFF between each test.
5. There should be 120 VAC on the Fan leads at B1 and B4 on the Control Board. See Wiring Diagram.
6. If the correct voltages are not there, check for correct input voltages 115VAC at leads 602 and 500 on the Control Board. See Wiring Diagram. See CONTROL BOARD LEAD LOCATION(S).
7. If correct voltages are at leads 602 and 500 and not at FAN terminals, possible faulty Control Board.
8. If the correct voltage IS NOT at leads 602 and 500, then check the input cord, circuit breaker, line switch and associated leads. See Wiring Diagram.
9. If the correct voltages are at the FAN terminals, then check for correct voltages at the fan motor. See Wiring Diagram.
10. If the correct voltages are at the fan motor, possible bad motor.

Thanks for watching! Please like, comment and subscribe.

Video Produced by Thrifty Garage (Please Subscribe!)
www.youtube.com/thriftygarage

Find us on Facebook (Share!)
[ Ссылка ]

Connect on Instagram (DM me!)
[ Ссылка ]


As Always, Thanks for Watching!

- TG (Thrifty Garage)

Business Inquiries:
2401 E. 32nd Street, 10-248
Joplin, MO 64804-3177
thriftygarage@gmail.com

#TG #ThriftyGarage #DIY #LawnCare #Landscaping #HomeImprovement #Handyman #Hobbiest #Enthusiast

140hd fan,lincoln welder repair,lincoln welder fan motor,welder fan replacement,faulty mig welder,lincoln electric 140hd,140hd lincoln electric,lincoln welder not working,140hd weld pak,140hd vs 140c,mig welder repair,TG,ThriftyGarage,home depot welder,welder,welding,how to repair a welder,lincoln easy mig 140 welder,tg machine,my welding machine on but not spinning,mig welder,weld,lincoln electric,repair,lincoln welder,how to,diy,lincoln,flux core,fix

свернуть