We will now look at the system hardware of the Omron CP1H controller. The Omron CP1 series of programmable logic controllers consists of three different units. CP1E is the cost-effective unit, CP1L is the high-performing controller that can come with embedded Ethernet and the CP1H is the position control and comprehensive programmable logic controller.
We will be looking a the CP1H for this series, but a majority of the information can be applied to the CP1E and the CP1L controllers as well.
Let’s start by looking at the CP1H hardware.

The CP1 series is designed with the same basic architecture as the CS and CJ Series. The special I/O units and CPU bus units of the CJ series can then be used. Always use CPM1A expansion units and CPM1A expansion I/O units when expanding the I/O capacity.

This is the start of the Omron CP1H Series to get you familiar with this programmable logic controller. (PLC)

More information can be obtained at our website. This includes all of the links mentioned in this video.
[ Ссылка ]

This series on the Omron Sysmac CP1H Controller (PLC) will go step by step through learning how to use this innovative unit.

00:00 Omron CP1H PLC System Hardware
00:51 Omron CP1H Hardware
01:50 CP1H Terminal Strips
02:26 Battery Location
03:04 Programming Port / Dip Switch Settings
04:08 Communication Boards
05:12 Expansion Port
06:38 Model and Serial Numbers

Omron CP1H – System Hardware and Programming Manuals
[ Ссылка ]

There are several reasons why we are using the Omron CP1H Controller. Here are just a few.
- Standalone PLC with built-in I/O
- Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus, Host Link, ASCII (No Protocol)
- Built-in Analog inputs and outputs
- 4 axis control of motion
- 4 high-speed counters
- powerful instruction set (similar to CS and CJ series)
- Ability to expand the system with a variety of modules

[ Ссылка ]

свернуть