Buy Now!
New Wheel Hub from 1AAuto.com [ Ссылка ]
New Wheel Hub Set from 1AAuto.com [ Ссылка ]

Groaning or grinding coming from your Toyota Sienna's wheels is a sign that the bearing is wearing out, and should be replaced. This press fit bearing means you need to remove it from the wheel hub as well. This video shows you how to install a new wheel bearing and hub on your 2004-2010 Toyota Sienna.

• Check here for more videos on the 2004-2010 Toyota Sienna: [ Ссылка ]

This repair was done on a 2006 Toyota Sienna LE 3.3L and the process should be similar on the following vehicles:
2004 Toyota Sienna
2005 Toyota Sienna
2006 Toyota Sienna
2007 Toyota Sienna
2008 Toyota Sienna
2009 Toyota Sienna
2010 Toyota Sienna

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 22mm Wrench
• 10mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 21mm Socket
• 22mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Bearing Race and Seal Driver [ Ссылка ]
• Press
• Tie Rod Puller
• Snap Ring Pliers
• Straight Cutters
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Bearing Grease
• Center Punch [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Toyota Sienna 2004-2010 2nd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть