3D model description
Fully 3D printable czechoslovak OT-64A armored personnel carrier in scale 1/10.
With 8-Wheel drive (AWD).
Fully amphibious.
Link to assembly guide:
[ Ссылка ]
Link to download:
[ Ссылка ]
The OT-64 SKOT (Czech acronym for: Střední Kolový Obrněný Transportér, and/or Polish Średni Kołowy Opancerzony Transporter – medium wheeled armoured transporter) is an amphibious armored personnel carrier (8x8), developed jointly by Polish People's Republic (PRL) and Czechoslovakia (ČSSR) well into the 1960s.
Until the early 1970s Czechoslovakia and the Polish People's Republic produced around 4,500 OT-64 SKOTs of all variants.
The OT-64 was the answer to the Soviet BTR-60. Contrary to this, the OT-64 used a diesel set in place of a petrol engine. That diminished the danger of fire and at the same time increased the range. The main advantage in relation to the Russian counterpart was the full-armored interior. The entrance is at the rear of the vehicle via twin doors. The OT-64 has NBC protection facility and night-vision equipment. It has central inflation for all wheels which can be controlled by the driver. The OT-64 is air-transportable and amphibious, with two propellers installed at the back.
Lenght: 751mm
Width: 251mm
Height: 295mm
Weight: approx 5 kg
Detailed, full of functions and easy to build (print).
All wheel drive.
Coil spring suspension.
Servo driven turret traverse.
Functional propellers and sealed hull means that vehicle is ambhipious.
Functional rudders.
Functional headlights, taillights and blinkers.
Printed tires.
Easy access to the transmission for maintenance.
