This is a 1990 Jeep Wrangler 2.5 5 Speed. The starter would only spin briefly and would take several minutes to get it to start (if at all). It was a bad starter relay, which is located on the firewall a few inches below the heater hoses. It's held on by 2 10mm nuts and required a minor modification to install, that being the solenoid wire. The solenoid wire has a regular push on spade connector, which will be removed and instead uses a bolt down wire clam included with the new relay. Total repair time was around 15 minutes and the Jeep is starting great!

свернуть