Click for more info and reviews of this etrailer Trailer Hubs and Drums:
[ Ссылка ]
Check out some similar Trailer Hubs and Drums options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the etrailer Easy Grease 12 1/4 inch diameter trailer hub and drum assembly for 8,000 pound axles. Has the 8 on 6 1/2 inch bolt pattern, and it uses the 9/16 inch diameter wheel studs. Now, this trailer hub and drum assembly will provide the surface area for your brake shoes to grip when your brakes are activated. If you look back here, you can see on the inside. Now, this is compatible with both electric and hydraulic drum brakes.
And you'll see the finished surface here around the drum, that's where your brake shoes would apply if you're using hydraulic drum brakes. If you're using electric brakes, you can see here's the finished area where the magnet would apply for electric brakes. Now, this part does come with the Dexter E-Z Lube and etrailer Easy Grease compatible grease cap, and that makes lubricating your bearings fast and easy. And what that is, is those types of axles, they'll have a grease zerk fitting on the end of the spindle that allow you to pump grease into the bearings without having to remove the whole hub and drum assembly. So basically, when this is installed, you can see there's a rubber cap right here.
That rubber cap can pop out, you can access that zerk fitting, put your grease gun on there, pump the grease in. When you're done, put the rubber cover back on, and you're all ready to go. Saves a lot of time and hassle. Now, this part will include everything shown here on the table. It includes the 12 1/4 inch diameter hub and drum with the 9/16 inch diameter wheel studs.
It includes the outer bearing race right here. If we spin it around, it includes the inner bearing race. Now, it will include the inner bearing, it'll go right in there, just like that onto the race. It will include the outer bearing, goes right there. Does include the grease seal, which after you put in your inner bearing, then you'll put the grease seal on there.
And then as we mentioned, it comes with the Easy Grease cap that covers the outer bearing. And then it also includes, right over here, eight of the 9/16 by 18 size lug nuts to hold your tire and wheel assembly to the hub. Now, this is a sturdy iron construction, they use a zinc-enriched paint on the drum to add durability. Application again, fits 8,000 pound E-Z Lube and Easy Grease trailer axles with the #42 spindles. It is compatible with standard axles from most manufacturers including Dexter, Lippert, and AL-KO. Now, these bearing races and seal parts that we just went over, if you do wanna know the part numbers of them and any specifications on them, they are all listed on the product page with all the numbers and specs on them. Now, this is QAI and CSA certified. Few dimensions on this, if we measure the internal dimension of the drum, which is inside to inside, I got a ruler here, and this ruler is a 13 inch long ruler just to show you. And if we put it on there, you can see inside to inside is right at 12 1/4 inches diameter. The width where your shoes would go is gonna be right at four inches wide. Now, this is designed to work with the 12 1/4 inch diameter brake assemblies. We mentioned the bolt pattern on this wheel is an 8 on 6 1/2 inch bolt pattern. Wheel stud diameter, again, 9/16 of an inch. And the weight capacity on this one assembly is 4,000 pounds, so when this is used with one of these on the other side of your axle, it meets the 8,000 pound capacity of your axle. But that should do it for the review on the etrailer Easy Grease 12 1/4 inch diameter trailer hub and drum assembly for the 8,000 pound axles.
Ещё видео!