Click for more info and reviews of this etrailer Trailer Hubs and Drums:
[ Ссылка ]
Check out some similar Trailer Hubs and Drums options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Today, we're going to take a look at the 10 inch pre-greased trailer hub and drum assembly for 3,500 pound easy lube axles, has a five on four and three quarter inch bolt pattern. Now this trailer hub and drum assembly will provide the surface area right in here for your brake shoes to grip when your brakes are activated. And this is compatible with electric brakes and hydraulic drum brakes. This is a pre-greased hub and drum assembly. Very easy to install, no need to pack the bearings with grease because they'll come already grease from the factory, does include the pre-greased inner and pre-greased outer bearing. A bearing races are pre-installed and it includes the grease seal right here in the rear.
You can see if I pull that plug out, your grease seal is also already installed in the grease, comes with grease caps. Those come with two different grease caps, comes with the standard cap and it comes with the easy lube cap that you'll use on the easy lube axles.And also comes with five of the half inch by 20 size lug nuts. Now this hub and drum assembly is far the easy lube trailer axles and the easy lube axles. It's the axle that has the grease zerk fitting on the end of the spindle, and that allows you to grease your bearings without having to remove the complete hub assembly from the axle. So that's where they all include this easy lube compatible grease cap.
So it makes lubricating your bearings fast and easy. All you have to do. This is installed right out here. All you have to do is pop out this rubber plug and then you'll gain access to the grease zerk fitting on the end of the spindle, put your grease gun in there and pump grease in there. So you don't have to take the whole assembly off.Now, this is made of a sturdy iron construction.
They do use a zinc-enrich paint on the drum to add durability. And the bolts are also zinc finish to resist corrosion. This is QAI and CSA certified specs on this. The application again is for 3,500 pound easy lube trailer axles with the number 84 spindles. And it is compatible with standard axles from most manufacturers, including Dexter, Lippert and Alco, the actual drum dimension itself.
The inside diameter, we put a ruler on it. It's 10 inches. The width on it or depth is right at two and a half inches. And it is designed to work with 10 inch brake assemblies.The bolt pattern again is five on four and three quarter inches. The wheel stud size is a half inch and the weight capacity on this one is 1,750 pounds. So when it's used with one on the other side of the axle, it'll meet your 3,500 pound axle rating. Now the bearings that are used in this, the part number on the inner bearing is L68149, on the outer bearing is L44649, on the grease seal, that's part number 588406. Now on the caps, the standard cap is F001518. The grease cap with the plug is the DC200L-DCRP. And then the lug nuts part number for five of them is CE11051.But that should do it for the review on the 10 inch pre-greased trailer hub and drum assembly for 3,500 pound easy lube axles with the five one four and three quarter inch bolt pattern.
Ещё видео!