*PLEASE SUBSCRIBE*

We are excited to continue this series of featuring the variety of adjustments on all of our chairs and today we look at Herman Miller Mirra Chair.

Table of contents
0:00 Intro
0:20 Height adjustment
0:46 Forward tilt adjustment
1:31 Front edge angle adjustment
2:02 Tilt limiter adjustment
2:44 Lean back tension adjustment
3:22 Arm adjustments
3:52 Lumbar Adjustment
4:19 Final remarks
4:50 Bloopers

Adjustment Breakdown

Height Adjustment

1. Pull height adjustment lever up to move the chair up or down to whichever position fits you best

Forward Tilt Adjustment
Forward most lever on the left side of the chair
Lean back in the chair and press the lever downward to activate and then this will allow you to lean forward in your chair. To go back to a standard position lean back and lift up the lever and you will go back to normal.

Front Edge Angle Adjustment
While sitting or standing to tilt the front edge of your leap pull the lever up on front of the chair while sitting and push down on the front edge of chair and release the lever to set the position where it feels most comfortable.

Variable Stop Tilt Lock Adjustments

There is a total of 3 different position settings for this lever. Moving it down increases your recline ability and all the up is the back lock which has some give but not allot.

Lean Back Tension Adjustment
Rotating the knob located near the same location as the variable tilt lock adjustment, rotate the knob clockwise to increase the tension when reclining and counter clockwise when you want to decrease the tension while reclining.

Arm Adjustments

1. Each arm has its own lever at the base of the arm, lift this to change the height of each arm for the best comfortability.

2. The Arm pivot function of the pads have a right, left and center adjustments

Lumbar Adjustment

The Mirra 2 has a different lumbar design in which is has the up and down movement function but each side of the lumbar can be adjusted to best suit your back needs.
To raise and lower the lumbar simply lift it up and down to your desired position.
To adjust the tension on your back turn the knobs on the right and left of the lumbar to desired position.

Crandall Office Furniture has been remanufacturing Steelcase & Herman Miller office chairs since 2002, and since then has grown to become the largest remanufacturer of high-end office seating in the United States. We see and work on thousands of these chairs every year, which gives us a unique insight into how they stand up to long term use, where they fail, and how to fix them. If you're looking to learn more about high end seating, you're in the right place!

► Learn More About our Remanufactured & Refurbished Chairs and our company at: [ Ссылка ] Shop Steelcase Authorized Returns - [ Ссылка ]
Shop Haworth Open Box Returns - [ Ссылка ]

свернуть