Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a new TRQ CV axle assembly in your 2006-2011 Honda Civic. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2009 Honda Civic LX 1.8L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• Pry Bar [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 32mm Socket [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Paper Towels [ Ссылка ]
• Safety Glasses
• Bucket
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Punch
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Honda Civic 2006-2011 8th Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
