Buy Now!
New Coil Spring Set from 1AAuto.com [ Ссылка ]
This video shows you how to install new coil springs in your 2005-2010 Chevrolet Cobalt. Worn coil springs cause a bouncy, unstable, and unsafe ride. If the ride in your vehicle feels like a trampoline, it's time for new springs!
This repair was done on a 2007 Chevrolet Cobalt LT 2.2L Coupe 2-Door FWD and the process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt
Tools you will need:
• Pry Bar [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 18mm Socket
• 19mm Socket
• 1/2 Inch Impact Gun [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Drill
• Brake Grease
• Liquid Thread Locker
• Jack Stands [ Ссылка ]
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
