In this video were testing my latest FPV Long-Range High-Penetration DIY antenna setups. I'm using DJI here, but this would work well on Analog, HDZero, and WalkSnail systems as well.

How do you improve FPV Range & Penetration? Do you need expense antennas? Let's find out!

Please Like, Comment, & Subscribe if you enjoy these videos, and if you want to support my efforts feel free to: "Buy Me a Coffee": [ Ссылка ]

-------- Summary of Video: DJI High Gain Antenna Testing ------------------
0:00 - Introduction
0:19 - Penetration Tests
0:35 - Antenna Setup #1
0:50 - Analog, HDZero, WalkSnail
1:10 - Antenna Setup #2
1:25 - Antenna Setup #3
1:43 - Antenna Setup #4
2:03 - Antenna Setup #5
2:28 - Penetration Results
2:50 - Long-Range Test
3:27 - Weird Glitch Issue
3:50 - VTX Antenna Note
4:30 - Top 3 Setups
5:00 - 7km (4 miles) Range!
5:20 - Favorite Setup?
6:00 - Conclusion & Next Steps

--------------- Wanna Build a Helical Antenna? ----------------------------------------------------------
Below I'll share the DIY video, a list of basic parts and tools, and provide the complete setup details for reference. Hope this is helpful to those looking to improve range without spending a lot of money.

------------- DIY HELICAL INFO ---------------------------------------
Here's my Super Simple "Trash Helical" DIY video, costs ($10-$20):
[ Ссылка ]

Here’s the STL file I use: [ Ссылка ]

• "Free" Version Recycled Parts List:
- 35mm of Solid Copper Wire, thicker is better
- Coax Cable with SMA connector, can use an old antenna
- Metal Lid from a Pasta Sauce Can, or similar. Aluminum isn't recommended because it's very difficult to solder...
- Plastic/Wooden Tube to wrap copper around, about 15mm diameter.
º Or you can 3D print parts if you have a printer

• "Cheap" Version Parts List:
- 35mm of Solid Copper Wire, thicker is better
- RG405 Coax Cable with SMA connectors
º I ordered "Uxcell SMA Male to SMA Male RG405 Coax Cable" which was $10 and enough to make 4 antennas
- Copper Plate, or Blank Circuit Board
º I ordered "Copperlab 2-5/8 Inch Round Circle Disc Copper" f0r $15 and it's enough to make 12 antennas
- Plastic/Wooden Tube to wrap copper around, about 15mm diameter.
º Or you can 3D print parts if you have a

* Note: You can mix and match the above versions and substitute parts as needed. Something I mention in the video is these antennas don't have to be perfect to function very well.

• Basic Tools:
- Soldering Iron and Solder (with flux core ideally)
- Pair of pliers
- Ruler or Tape Measure
- Optional: 3D printer

------------- VTX / VRX Antennas and Quad Setup ---------------------------------------
- Frame: iFlight Chimera 7
- VTX: DJI O3 with V2 Goggles
- VTX Antenna: HGLRC Hammer Omni
- VRX: Fatshark Sharkbyte Model RX5.1
- VRX Antennas: Stock Linear, TrueRC Duality, TrueRC X2-Airs, 7-Turn Helical Antennas
- FPV Camera: DJI O3
- Flight Controller: Mamba F722 MKIII
- ESC: Mamba F50 4-in-1
- Motors: EMAX ECOII 2807 1500kv
- Props: HQ J75
- GPS Module: HGLRC M100
- Control Link RX: ELRS Gemini
- Buzzer: ViFly Finder 2
- Batteries: DIY 6s2p 8000mAh Li-Ion Pack made with Molicel p42a cells

#longrange #dji #fpv
Stay Tuned, Cheers!
__________________________________________________
Quad Setups:
- iFlight Chimera 7", with Emax ECOII 2807 1500kv motors, HDZero Freestyle VTX
- iFlight Megabee v1 3" with WalkSnail Avatar 1s VTX
- FlyWoo Firefly Baby Nano with HDZero Whoop Lite 1s VTX
- DemonRC 5" Freestyle Quad with Xing 2306 2450kv motors
- ELRS on all quads now, previously CrossFire
- FRSky Taranis X9D Plus TX with BetaFPV ELRS 500mW TX Module
- DIY Helicals, search my channel about how great those are!
- TrueRC X2-Air Antennas, Singularity, TBS Triumph Pro, VAS antenna Tests Soon!
- DIY Li-Ion packs using Molicel Batteries, also amazing, check out my video for reference!


#fpv #fpvdrone #dronevideo #gopro #hdzero #dvr #norway #longrange

свернуть