Click for more info and reviews of this Wheel Masters Tire Repair Tools:
[ Ссылка ]
Check out some similar Tire Repair Tools options:
[ Ссылка ]

[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Wheel Masters Tire Pressure Valve Extenders with the 135 degree bend for your rear wheels, has a quantity of two extenders. Now, these are angled valve extenders, so it would make it very easy to access the valve stems on your rear tires that have the dual wheels. These are a nice sturdy nickel-plated brass stem, and you can see they are bent at 135 degree angle, and they'll screw onto your existing valve stem. Basically, this 135 degree bend will place your valve stem in a much easier to reach spot. Lots of times on your dual wheels, your valve stem will be pointing towards the inside of the vehicle, so with these screwed on, it'll bring it back out towards you, so it makes it easy to access.

These will work on both steel and aluminum wheels, they are a corrosion resistant nickel-plated brass construction, makes them long lasting. You can see they do come with a metal valve cap, and then right here is a threaded head on the extender, this will screw onto your existing valve stem. So what you'll do is take your valve cap off your valve stem that's on your wheel, put this on there, screw this in the plate, tighten it down, make sure it doesn't leak, and then what you'll do is it'll bring it back towards you, and then you'll just remove this valve cap to be able to put air, check your air pressure, or put more air into it, makes it a much easier to reach spot. Now, these parts are made in the USA. Now, these extenders are also available on other angles, they come in a 45 degree, a 90 degree, and 180 degree, those we do sell separately on our website.

But should do it for the review on the Wheel Masters Tire Pressure Valve Extenders with the 135 degree bend for your rear wheels..

свернуть