Buy Now!
New Fuel Injection Pressure Sensor from 1AAuto.com [ Ссылка ]

The fuel tank pressure sensor feeds data about pressure inside the fuel tank to the EVAP system to determine if there are evaporative leaks in the system. A bad sensor will most likely trigger a check engine light for the EVAP system. This video shows you how to install a new fuel tank pressure sensor in your 2006-10 Ford Explorer.

• Check here for more videos on the 2006-2010 Ford Explorer [ Ссылка ]

This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pocket Screwdriver
• 10mm Socket [ Ссылка ]
• Vacuum
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• T30 Bit [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• 1-1/16 Inch Wrench
• Paper Towels [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Explorer 2006-2010 4th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть