Shop for New Auto Parts at 1AAuto.com [ Ссылка ]

This video shows you how to install an engine oil pan on your 2008-2013 Honda Accord. The oil pan holds engine oil to be pumped up to the engine. A leaky or damaged oil pan will lead to low oil levels, or no oil at all, which can cause major damage to your vehicle's engine.

This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• Pry Bar [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• Dead Blow Hammer
• Trim Tool Set [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Block of Wood
• Gloves [ Ссылка ]
• RTV
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Funnel
• Hammer

Subscribe: [ Ссылка ]

Check out our playlist:
Honda Accord 2008-12 8th Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть