After replacing rod bearings or working not the high pressure VANOS pump you have to bleed the VANOS system. In the video I will walk you through using ISTA to bleed the solenoids. Unfortunately mine were bad and generating errors in the ECU. The replacement of the solenoids is a little tricky on the right bank but can be done in a few hours.

The M5 is now ready to rip!

0:00 Why this is important
0:18 Bleeding VANOS solenoids with ISTA
1:53 Prepping the car for the work
2:01 VANOS solenoid replacement
2:51 Coolant draining
3:07 Tools used on left bank
3:41 Solenoids are in!
3:55 Reassembly is the reverse of disassembly :D
4:05 Final VANOS bleed results
4:30 Wrap up and end credits

#E60M5, #V10, #DIY

FOLLOW ME!
Facebook - [ Ссылка ]
Twitter - [ Ссылка ]
Instagram - [ Ссылка ]

Subscribe: [ Ссылка ]

Part Numbers:
-----------------------
11367841072 VANOS Solenoids
82141467704 Coolant (concentrated, needs 50/50 mixing with distilled water)

Tools:
-----------
Coolant air purge tool: [ Ссылка ]
ICOM Next A Part number for ISTA: 81312360883 (many sources indicate it is no longer available)

[ Ссылка ]

свернуть