How to Replace Mazda 3 Wiper Blades in Under 2 Minutes on a 2012 Mazda 3 2.0L sedan. This applies to most Mazda 3's. When I first did this job a few years ago it was frustrating, but once followed the sequence below, it became quick and easy

1. Remove old blades by rotating blade until it clicks off
2. Remove old adapter from 'hook' end of wiper arm (optional)
3. Remove new wiper adapter from wiper (optional if replacing adapters)
4. Install new adapter into hook
5. Push end of hook into corresponding end of wiper until you hear a click...if properly aligned very little force is necessary, and you can confirm alignment by seeing that the small hole and boss-holes are respectively aligned.

Amazon Affiliate Links:

Parts:

Driver's Side 24mm Blade: [ Ссылка ]
Passenger's Side 19mm Blade: [ Ссылка ]

Camera: Nikon D7000 [ Ссылка ]
Lens: Tokina 11-16mm f/2.8 AT-X [ Ссылка ]

Disclaimer:
Due to factors beyond the control of Oliver Porter, I cannot guarantee against improper use or unauthorized modifications of this information. Oliver Porter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oliver Porter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oliver Porter.

свернуть