We had previously dived into Manual Boost Control which is an easy way to up your boost and avoid boost sag ([ Ссылка ]), but now we'll get into the wonders and flexibility of Electronic Boost Control (EBC). In this episode we will explain everything you need to know and how to install it in the car and test it using TunerStudio before you even start the engine.
Supplies:
MAC Solenoid (be careful there are many fakes!) - [ Ссылка ]
1/4" npt hose barbs - [ Ссылка ]
1/4" npt muffler - [ Ссылка ]
7/32" vacuum hose - [ Ссылка ]
I bought this separately to save a little money (my price was $40 total) but there are also some kits available for about $15 - 20 more.
You might also need some 22gauge AWG wire (the solenoid comes with about a foot). I made mine plug and play by crimping some small spade connectors to the ends to plug into the stock MAF harness as shown in the video. On a 1990 - 2005 Miata this is super easy but basically you need to get one wire to +12V and the other back to your Boost control output pin in your Megasquirt or other ECU.
#namiata #boostcontrol #tuning #megasquirt
OGPedxing is all about DIY, gadgets, and tools.
Some links may be for my affiliate pages which earn the channel a tiny amount if you click through. It's an easy and free way to support the channel and helps me bring more content to you! I greatly appreciate it!
See my recommended tools and parts here (all stuff I use personally):
[ Ссылка ]
