Buy Now!
New Coolant Reservoir from 1AAuto.com [ Ссылка ]
This video shows you how to install a new direct fit coolant reservoir or overflow tank from TRQ in your 2008-2013 Nissan Rogue. Your vehicle is equipped with a tank containing extra coolant, and space for the coolant to overflow to when the system gets hot. A cracked or broken tank could slowly drain your vehicle of much needed fluid. A dirty tank could send debris into the system, clogging it.
This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• 10mm Socket [ Ссылка ]
• 16mm Socket [ Ссылка ]
• 18mm Socket
• Coolant Funnel Set
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Block of Wood
• Gloves [ Ссылка ]
• Safety Glasses
• Bucket
• Floor Jack [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Nissan Rogue 2008-13 1st Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
