Click for more info and reviews of this TireMinder TPMS Sensor:
[ Ссылка ]
Check out some similar TPMS Sensor options:
[ Ссылка ]

[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this TireMinder replacement signal booster. This is going to replace the signal booster for your TireMinder A1AS, i10, or Smart systems. Now, even if this doesn't look exactly like the original, it is going to work with all of those systems from TireMinder, so you can trust it's gonna do exactly what you need to do. Coming from TireMinder, it's gonna be compatible with your system even if you had, your original signal booster looked a little bit different, this will still do a great job for you.

This is gonna be right about 4 1/2 inches tall if you include those antennas, about 2 1/2 inches wide, and about 3/4 of an inch deep there. So, keep that in mind when you're deciding where to mount it. They do include zip ties to help you get mounted in place. The cable here is about three feet long. It's got the alligator clamps there on the end.

Your black is gonna be your ground, red is gonna be your power. Very easily connect to your 12 volt or 24 volt DC systems. Just like the original, this is going to install on the exterior of your RV or trailer. It is gonna help to cut through the signal interference coming from other wireless electronic devices, and other vehicles that you're driving past and that sort of thing. So these, this is gonna be exactly what you need if your original signal booster has, is no longer working properly, or for some reason is no longer a part of your system.

This is gonna help extend that signal from your tire pressure monitoring, monitoring stems to your monitor in your RV. So, that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..

свернуть