This video was provided by one of our customers on our UpFix Community Forum!
Bill did an amazing job on showing how to remove the ABS control module on a 2007 Toyota Camry.
Here are the details Bill provided us:
The ABS in my 2007 Camry Hybrid is on its way out I believe, because it is constantly trying to pressurize turning the pump on and off even with the car turned off.
Researching this problem I found the my particular Camry Hybrid with the fifth VIN digit B has the most expensive and complicated of all the Camrys ABS Assemblies to deal with. I found that on almost all other Camrys of the same year with the same ABS problems that you can basically just remove and replace the ABS module containing the solenoids while leaving the rest of the abs intact in the vehicle. My pump OEM part # 44510-30270 fifth VIN B is a whole other story. This whole assembly must be removed from the car which means disconnected the brake fluid lines and gets a little messy.
So at this point the options I found to fix the abs problem are:
1. Take it to the Toyota dealership and let them do it all, I believe the cost will start in the $1750 - $2500 area.
2. Source a used pump and then find a trusted mechanic to install for you. The cost if found on Ebay started around $300 and up and local salvage yards were starting in the $400 and up.
3. You can try installing the used one yourself but this will require that you have access to Toyota Tech stream Software, and OBDII Interface device and laptop to run it on to bleed the brakes and recalibrate the system afterwards
4. And the latest option that I just found was a company out of Atlanta, GA that offers to rebuild the module by sending it to them with about a 10-14 day turn around. I am going to be trying this option, They charge a reasonable $199 for the service and you get your abs back rebuilt . All you have to do is remove the whole pump and send it to them. Here are the steps to remove the ABS Pump assembly Assembly 44510-30270 from a 2007 Camry Hybrid in order to send it to them.
You will need:
12mm Socket
10nn /fkared crows foot socket
10" extention
Ratchet
Towels
Vise Grips
Fist you will want to disconnect the negative from the 12 volt battery in the trunk.
Then use your vise grips to clamp the brake fluid line coming from the reservoir to the pump.
Then use the 10mm flared crows foot socket to remove the six brake fluid lines on the top of the pump.
Then use the 12mm socket to loosen the nuts on the side of the ABS pump then you will be able to lift the whole unit out of the car, wipe it down and package it to send to the company.
[ Ссылка ]
Part Number: 44510-30270
Similar Part Numbers:
0265800534, 0265950520, 0265800432, 0265800591, 4451030290, 0265800365, 0 265 800 534, 0 265 800 535, 0265800535, 0 265 800 591, 0 265 231 754, 0265231754, 4451006060, 4451006060, 4451006060B, 4451006060B, 4405006070, 4405006070, 4405006070C, 4405006070C, 4405033240, 4405033240, 4451033130, 4451033130, 44510060604405006070, 44050060704405033240, 44050332404451033130, 4405006080, 4405033160, 0265800714, 4405007010, 4405007090, 4451030270
For more information, visit our website:[ Ссылка ]
Ask questions & give answers! Become a member of our free UPFIX COMMUNITY FORUM HERE: [ Ссылка ]
Want to learn more? Visit our blog: [ Ссылка ]
UpFix services are an affordable and effective alternative to expensive dealership part replacements that can save you hundreds of dollars! We do more than just repair the part, we go to the root of the problem and upgrade the components to ensure the issue does not return. We will quickly fix your malfunctioning part and return it back to you. Our service is 100 percent guaranteed or your money back.
Contact UpFix & Shipping Instructions: [ Ссылка ]
International Shipping Available! We quickly ship to USA and CANADA.
Send to:
UpFix
4991 B U Bowman Drive, Buford, GA 30518 USA
Se Habla Espanol
Toll Free: 888-979-9343
Customer Service
Mon - Fri 9:00AM - 5:00PM EST
Lobby Hours for Drop-Off / Pick-Up
Mon - Fri 9:00AM - 5:00PM EST
