Click for more info and reviews of this Thule Windshield Wipers:
[ Ссылка ]
Check out some similar Windshield Wipers options:
[ Ссылка ]

Click for more info and reviews of this Thule Roof Rack:
[ Ссылка ]
Check out some similar Roof Rack options:
[ Ссылка ]

Click for more info and reviews of this Thule Windshield Wipers:
[ Ссылка ]
Check out some similar Windshield Wipers options:
[ Ссылка ]

Click for more info and reviews of this Thule Roof Rack:
[ Ссылка ]
Check out some similar Roof Rack options:
[ Ссылка ]

Click for more info and reviews of this Thule Windshield Wipers:
[ Ссылка ]
Check out some similar Windshield Wipers options:
[ Ссылка ]

Search for other popular Ford Explorer parts and accessories:
[ Ссылка ]

[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Today on our 2016 Ford Explorer, we'll be doing a test fit on the Thule Aeroblade Edge roof rack system, using part numbers T-H-7-6-0-3 for the rear crossbar and T-H-7-6-0-4 for the front crossbar and part number K-H-T-I-3-3-1-5-1 for the fit kid. These low profile, aerodynamic, ultra quiet crossbars allow you to carry accessories on the roof or your vehicle. You do have the option to change these plastic locks out with the Thule locking cores. You can pick four up with part number T-H-5-4-4. Their arch design is going to compliment the curves and lines of your roof. They're made out of a light weight anodized aluminum so they're going to be durable and rust-resistant. Let's go ahead and who you how to get them installed.

We've already got the front cross bar installed on our Explorer's flush-mounted rails. We've got it lined up with our factory mounts. Let's go ahead and do the rear one together. For our rear crossbar, we've already got one fit kid installed on the side. The other side installs the exact same way.

Let's go ahead and do that now. The first thing we can start out with, we'll grab our metal plate here and our pad. This is going to be part of our kit. We're going to slide it in to where it lines up with the two holes here. It's going to look like this. Then we're going to take our two Alan bolts, go ahead and put them through the holes.

Then we can move over to our Aeroblade crossbar and we need to make sure that the two holes are lined up here. If they're not, if they just have one hole, you need to make sure that they have two so you can simply come to the side here and then turn it until they show up. Then we'll take our fit kit that we put together and then get those started. Got it lined up. We can just grab our included tool.

Once we've got it started, we can kind of slide up and get our other one started. Then we can just tighten it down all the way. We want to be sure not to over-tighten because then you will damage the rubber portion here. Once we've got these secured down, we can set the whole thing aside for now. Then we'll grab our other included tool and head up to the roof for our Explorer. We'll need to remove the plastic fasteners on our flush-mounted rails on both sides. We'll take our included tool. It doesn't take much to get them loose. Give it a good turn and then you can just finish it out with your hands. Now we're ready to grab our crossbar and head up to the roof our Explorer. You'll need to be sure that it's loosened up. You can do that by loosening up this bolt right here with your tool. We'll gently set the other side in place right around the general area and do the same thing for this side. Then we'll grab our other included bolts, the ones with the larger head, and then we're going to get them started right here. If you have any trouble installing them, it can help if you put pressure on the top of the crossbar just so the holes line up better. Once we've got them hand-tightened, we'll take our included tool and tighten them the rest of the way down. Then we can just repeat the same process for the other side. With our rear crossbar in place and tightened down, our next step is we need to make sure we have an even amount of space on our crossbar here on both sides. There's actually a little scale here you can follow so you can just look at one side and go over to the other side and make sure it's the same. That looks pretty good. Then we can take our Alan tool and tighten up the top here. Now let's put on our covers. When we put our covers on, we need to make sure that the loc

свернуть