Remove/install selector lever handle with covering on Sprinter (MODEL 906)
1 Boot 4 Selector lever 6 Electrical connector
2 Selector lever handle 5 Cover 7 Wiring harness
3 Clamping piece
Remove/install
Notes on carrying out repair work in the
vehicle interior
1 Unclip boot (1) upwards
2 Put boot (1) upwards over the selector lever
handle (2)
3 Turn clamping piece (3) in counterclockwise Installation: Rotate clamping piece (3)
direction (arrow B). clockwise (arrow A).
4 Pull selector lever handle (2) off selector lever
(4)
5 Unclip cover (5) upwards Installation: Ensure that the electrical
wiring harness (7) is correctly routed.
6 Detach electrical connector (6) and remove
cover (5)
7 Install in the reverse order
