Over time, your concrete floor or driveway may look unsightly with dirt and rust stains. Use CLR Calcium Limescale & Rust Remover for a routine clean to give your floor a quick and easy makeover.
DO NOT USE ON ARTIFICIALLY COLOURE CONCRETE, RENDERED OR AGGREGATE SURFACES.
Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean. Test the CLR on an inconspicuous spot first before applying to entire surface.
Step 1. Sweep area that CLR Calcium Limescale & Rust Remover will be applied to.
Step 2. Fill a bucket or container with 1 part CLR Calcium Limescale & Rust Remover to 1 part water.
Step 3. Apply solution onto floor surface with a brush, scrubbing area as you go.
Step 4. Let solution sit for 2 minutes.
Step 5. Rinse floor surface thoroughly by hosing down with fresh water.
Tip: Stubborn build up and rust stains may require another cleaning with neat CLR. Repeat the process for no more than 2 minutes at a time, until CLR Calcium Limescale & Rust Remover has effectively dissolved the build-up.
For more information, visit [ Ссылка ]
