Here is a Find and a Repair on Wire that powers the Blower motor operation. Hot wires from a bad connection can cause alot of problems to the unit and the connector that plugs into it. If you have to wiggle a wire or relay to get something to work, clearly there is a problem there. Think of it as a hot toaster plug and wire into an electrical wall socket, if its hot to the touch, its either a bad toaster plug, bad electric wall socket or just a well used and worn out terminals in the wall socket . Thats the problem here, hot wire melted the plastic connector which in turn released the locking tab that holds the terminal in the connector and it became loose and made a bad loose connection and thats enough to lose contact and heat up.
Here is a fix that you can use just like in the old days of Chrysler Plymouth and Dodge fuse boxes, use to make the connector hole bigger and install a different seperate terminal just for that burnt pin.. Of course the proper fix is to replace the terminal and the plastic connector if its available so its a plug and play or you can always cut it off of a Junk car if you can find one
S12E1078
Visit My Store for Cool Merchandise
[ Ссылка ]
Ещё видео!