Maiden flight of my new FT Bloody Baron.

The speed built kit has just come out but is sold out currently. You can download plans from the Flitetest Forums here:

[ Ссылка ]

This plane is extremely easy to build and took me about six hours from start to finish. Only needed two sheets of Dollar Tree foam board!

It flies amazingly well. In this maiden flight I started with a very conservative throw of only 40% of maximum available on high rates. It rolls a little slowly so the next flight I will bump this up a little.

My setup is a 2212 (2830?) 1400kv outrunner, 8x45 Gemfan multirotor prop, 20 amp ESC, 2200mah 3S Lipo, LemonRX 7-ch stabilizer receiver. The aileron servo is from Hobbyking, the elevator servo is a generic tower 9g servo from eBay.

You can read more about this plane and others I have built on my Blog on RCGroups.

[ Ссылка ]

Filmed with the Xiaomi Yi Action Camera.

"Odyssey" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
[ Ссылка ]

свернуть