How To Assemble Dive Equipment explained EASY in this video! Doing your dive equipment setup the right way is important for safety and it can improve your Diving Experience Significantly! We hope that you enjoy this How To Assemble Dive Equipment video.
How To Assemble Dive Equipment is important because you need to assemble dive equipment before every dive and also as a scuba diving skill during the Open Water Diver Course. During the Divemaster and IDC Course you need to demonstrate the dive equipment setup in Divemaster and IDC skill circuit.
Chapters and Timestamps for easy navigation:
00:00 Introduction
00:12 Inspect the tank, visual inspection sticker and the hydrostatic test date
00:30 Check the O-Ring
00:40 Open the tank valve and give a little burst to clean the valve
00:56 Put the BCD correctly over your scuba cylinder
01:03 At least 4 fingers from the top
01:21 Attach the Safety Strap
01:50 Make sure everything is attached correctly
02:04 Grab your regulator and unscrew the dust cap from the first stage
02:16 Place the first stage over the valve
02:23 Gently screw the first stage on the tank valve (Only 3 finger tight)
02:38 Attach the low-pressure inflator hose to the BCD
03:03 Attach the alternate air source
03:18 Turn the SPG glass away from anyone
03:29 Slowly open up the tank valve
03:35 You finished assemble the dive equipment
03:44 Fully inflate the BCD to check for leaks and the LPI
04:09 Orally Inflate the BCD
04:33 Purge, smell and breath through the second stage, while checking the SPG
05:09 Check the alternate air source
05:35 Make sure the dive equipment is streamlined
05:40 Gently place your equipment on its side and that is How To Assemble Dive Equipment
How To Assemble Dive Equipment becomes much more easier after a few tries. It is still very important to do a buddy check after you assemble the dive equipment to make sure your dive equipment is assembled correctly. Check out my buddy check video here: [ Ссылка ]
Please SUBSCRIBE to our channel here: @ScubaDivingTips
Useful links:
🤙 Join my PADI IDC Course and become a Diving Instructor:
[ Ссылка ]
or
[ Ссылка ]
🤿 Follow my Scuba Diving Tips blog:
[ Ссылка ]
🎥 Check out my other YouTube Channel:
@Marcel van den Berg
[ Ссылка ]
🤳 Follow me on Social Media:
👨💻 Facebook Page: [ Ссылка ]
🐦 Twitter: www.twitter.com/DivingTips
🐠 Facebook Group: [ Ссылка ]
Did this video help you with your Diving Skills? Then you can give the biggest Thank You by Joining my Channels Membership! Just click on the JOIN button above or click here: [ Ссылка ]
I hope that you liked this How To Assemble Dive Equipment - Dive Equipment Setup video. If you have any questions or suggestions then please leave them in the comments below.
I wish you all the fun with your future scuba diving experiences!
Marcel van den Berg
PADI Platinum Course Director
Sairee Cottage Diving
Koh Tao, Thailand
Email: info@scubadivingtips.net
Disclaimer:
Marcel van den Berg is a certified PADI Divemaster (2007), OWSI (2007), MSDT (2007), IDCSI (2008), Master Instructor (2010), and Course Director since 2011. This video and other video’s on the YouTube Channels: IDC Koh Tao Thailand and Scuba Diving Tips are for general informational purposes only. Always seek the advice of your Local Law, Scuba Diving Training Organisation, RSTC, and/or your scuba diving professional that is legally teaching/guiding you scuba diving whenever you are in doubt, or following a scuba diving course/guide scuba dive under the supervision of a scuba dive professional from any worldwide dive industry recognized scuba dive organization. Marcel (Mario) van den Berg, IDC Koh Tao Thailand, and/or Scuba Diving Tips are not liable or responsible for any advice, trading tips, or any other information, services, or product you obtain through this video or site. Marcel (Mario) van den Berg, IDC Koh Tao Thailand and/or Scuba Diving Tips are not liable or responsible for any injury, financial loss, failing a scuba diving course, and or loss of certification.
#MarcelvandenBerg #PADI #ScubaDiving
How To Assemble Dive Equipment - Dive Equipment Setup video.
