Buy Now!
New Intake Manifold from 1AAuto.com [ Ссылка ]

This video shows you how to install an intake manifold on your 2011-2019 Ford Fiesta. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is added to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.

This repair was done on a 2012 Ford Fiesta S 1.6L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 10mm Flare Wrench
• 10mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 18mm Socket
• 8mm Socket [ Ссылка ]
• Stretch Belt Tool [ Ссылка ]
• Hose Pliers
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Pliers
• E8 Inverted Torx Socket
• T25 Torx Driver
• T27 Torx Driver
• T30 Bit
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Swivel
• Drill
• Gloves [ Ссылка ]
• Safety Glasses
• Pick [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Fiesta 2011-2019 6th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть