This is a series of videos that will walk you through step by step as of how to build a 5inch Freestyle drone. Part 5 will be demoing how to connect a VTX and a FPV camera to your quad. We will also walkthrough how to set up your VTX table in Betaflight
Parts we use in this video
VTX:
[ Ссылка ]...
Camera:
[ Ссылка ]
If you are willing, you can buy me a coffee to support this channel! Thank you in advance!
[ Ссылка ]
VTX Table For the Rush Tank Solo
vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 5645 5885 5905 5925 5945
vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable powerlevels 4
vtxtable powervalues 14 26 29 32
vtxtable powerlabels 25 400 800 1W6
save
Part 1: How to connect to powertrain system FC/ESC/Motors.
[ Ссылка ]
Part 2: Learn how to set up your ELRS Receiver [ Ссылка ]
Part 3: How to Flash BetaFlight Firmware
[ Ссылка ]
Part 4: Cause of drone Runaway and the fixes
[ Ссылка ]
Part 5: How to hook up your VTX system/ Camera + VTX
[ Ссылка ]
0:00 Intro
0:30 Parts Required & Introduction
1:20 How to connect VTX system & How it works
2:00 Connecting the Camera To FC
3:08 Explain the Voltage acceptance range for VTX
5:54 Connecting the VTX To FC
8:51 Connecting the Antenna
9:24 Enable Ports and setup VTX Table
11:11 Battery and Goggle Bind test
12:03 Final Assemble
13:16 Test Flight & Outro
17:49 Oops
