Buy Now!
New Valve Cover Gasket Set from 1AAuto.com [ Ссылка ]
New Valve Cover from 1AAuto.com [ Ссылка ]

This video shows you how to install a new set of valve cover gaskets on your 2007-2013 Chevrolet Silverado 1500. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!

This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 10mm Deep Socket
• 10mm Shallow Socket
• 8mm Deep Socket
• 8mm Socket [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Pick [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть