The DTC (Diagnostic Trouble Code) P1690 can refer to different issues depending on the manufacturer and vehicle model. In the context of an "immobilizer SMATRA no response," it typically applies to Hyundai and Kia vehicles and indicates a problem with the immobilizer system.
**Code Definition:**
- P1690 - Immobilizer SMARTRA No Response
**Description:**
This code indicates that the ECM (Engine Control Module) is not receiving a response from the SMARTRA (Smart Transponder Antenna) unit. The SMARTRA unit is part of the vehicle's immobilizer system, which prevents the engine from starting without the correct key.
**Possible Causes:**
1. Faulty or damaged SMARTRA unit
2. Issues with the key transponder
3. Problems with the wiring or connectors between the ECM and the SMARTRA unit
4. Faulty ECM
5. Low or dead battery in the key fob
**Symptoms:**
- The engine may not start or may start and then stall.
- The security light may be illuminated on the dashboard.
- The Check Engine Light (CEL) may be on.
**Diagnostic Steps:**
1. Check for additional trouble codes that might give more context to the issue.
2. Verify that the key being used is the correct one for the vehicle and that the key transponder is functioning properly.
3. Inspect the wiring and connectors between the ECM and the SMARTRA unit for any damage, corrosion, or loose connections.
4. Test the SMARTRA unit for proper operation.
5. Check the battery in the key fob and replace it if necessary.
**Potential Fixes:**
- Repair or replace damaged wiring or connectors.
- Replace the SMARTRA unit if it's found to be faulty.
- Reprogram or replace the key if the transponder is not working correctly.
- Replace or reprogram the ECM if it’s determined to be defective.
- Replace the key fob battery if it’s dead.
It's essential to refer to the vehicle’s service manual for detailed diagnostic and repair procedures or consult with a professional mechanic for an accurate diagnosis and appropriate repair.
