Buy Now!
New Control Arm from 1AAuto.com [ Ссылка ]
The lower control arms are the lower support for the steering knuckle, and supports the suspension and wheel assemblies. When the arm is damaged, or the mount bushings deteriorate, performance and safety can be affected. This video shows you how to install a new TRQ lower control arm on your 2003-2013 Toyota Matrix.
• Check here for more videos on the 2003-13 Toyota Matrix: [ Ссылка ]
This repair was done on a 2005 Toyota Matrix Base 1.8L Wagon 4-Door and the process should be similar on the following vehicles:
2003 Toyota Matrix
2004 Toyota Matrix
2005 Toyota Matrix
2006 Toyota Matrix
2007 Toyota Matrix
2008 Toyota Matrix
Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 1/2 Inch Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Bungee Cord
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Rubber Mallet
• Wheel Chocks
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota Matrix 1st Generation 2003-13: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
