Buy Now!
New Thermostat with Housing Assembly from 1AAuto.com [ Ссылка ]
The thermostat controls the flow of coolant in your vehicle’s engine. When a thermostat fails, it can lead to overheating, which will damage the engine. One sign of a faulty thermostat is a cool upper radiator hose when the engine is at full operating temperature. It’s important to replace the thermostat immediately if you suspect it is failing. This video shows you how to install a new TRQ thermostat and housing in your 2007-18 Jeep Wrangler.
• Check here for more videos on the 2006-18 Jeep Wrangler: [ Ссылка ]
This repair was done on a 2015 Jeep Wrangler Unlimited Sport 3.6L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• 10mm Socket [ Ссылка ]
• Coolant Funnel Set
• Hose Clamp Pliers [ Ссылка ]
• Pliers
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Cloth Rags [ Ссылка ]
• Sandpaper
• Drain Pan
Subscribe: [ Ссылка ]
Check out our playlist:
Jeep Wrangler 2007-2017 3rd Generation JK: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
