Buy Now!
New Wheel Hub from 1AAuto.com [ Ссылка ]
New Wheel Hub Set from 1AAuto.com [ Ссылка ]

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2006-11 Honda Civic.

This repair was done on a 2007 Honda Civic EX 1.8L and the process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 32mm Socket [ Ссылка ]
• Bearing Puller
• Brake Caliper Hanger [ Ссылка ]
• Hub Puller
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Pliers
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Paper Towels [ Ссылка ]
• Rust Penetrant
• Chisel [ Ссылка ]
• Hammer
• Pick [ Ссылка ]
• Wire Brush [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Honda Civic 2006-2011 8th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть