The Alloy Mesh Pocket Used For Holding Stones Is A Net-Like Container Made Of Alloy Materials !
It usually has the following characteristics :
- High Strength
The alloy material enables it to bear a large weight and pressure, suitable for loading heavy objects such as Stones !
- Corrosion Resistance
It can be used in different environments and is not easily corroded !
- Mesh Structure
The mesh size is moderate, which can not only ensure that stones will not easily leak out but also allow water flow and other substances to pass through smoothly !
- Convenient For Transportation And Installation
It can be folded or compressed for convenient transportation to different locations for installation and use !
This kind of alloy mesh pocket is often used in projects such as slope protection, bank protection, and retaining walls to play a role in reinforcement and stability !
How To Use Forklift And Cement Slabs To Compress The Alloy Mesh Pockets !
Here are the methods for safely compressing alloy mesh pockets using forklifts and cement Slabs :
I. Preparation Work
1. Check The Equipment
- Ensure that the forklift is in good working condition. Check the brakes, hydraulic system, stability of the forks, etc.
- Check the integrity of the cement slab to ensure there are no cracks or damages to avoid accidents during operation !
2. Select An Appropriate Site
- Choose a flat, solid, and spacious site so that the forklift can operate safely !
- Ensure there are no obstacles or people around the site to prevent accidents !
II. Placing The Cement Slab And Alloy Mesh Pocket
1. Place the alloy mesh pocket on a flat ground and try to spread it flat as much as possible for better Compression !
2. Carefully place the cement slab on the alloy mesh pocket to ensure the center of gravity of the cement slab is stable and will not slide during operation !
III. Operating The Forklift
1. The driver should be focused and cautious when operating the forklift
- Slowly insert the forks of the forklift under the cement slab to ensure the insertion position of the forks is correct and stable !
- When lifting the forks, do it slowly and smoothly to avoid sudden movements that could cause the cement slab to tilt or slide !
2. Compression process
- When the forks lift the cement slab and alloy mesh pocket together, observe the compression situation of the alloy mesh pocket and adjust the height of the forks as needed !
- Do not over-compress the alloy mesh pocket to avoid damaging its Structure !
3. Landing operation
- When the compression reaches the desired degree, slowly lower the forks and place the cement slab and the compressed alloy mesh pocket smoothly on the Ground !
IV. Safety Precautions
1. Operators must be professionally trained and be familiar with the operation methods and safety regulations of Forklift !
2. During the operation, always wear personal protective equipment such as safety helmets and safety shoes !
3. Ensure that the load capacity of the forklift can bear the total weight of the cement slab and alloy mesh pocket to avoid over Loading !
4. If any abnormal situation is found, such as forklift failure or cement slab rupture, immediately stop the operation and take corresponding measures for Treatment !
