Check out our Range Rover Vogue 2020 Licensed 24v Electric Kids Ride On Car Assembly Instructions.
RESOURCES & LINKS:
____________________________________________
For more info on this car, visit - [ Ссылка ]
Check out the promotional video - [ Ссылка ]
Our ride-on cars - [ Ссылка ]
Our ride on motorbikes - [ Ссылка ]
Our ride-on scooters - [ Ссылка ]
____________________________________________
Here are the instructions:
1. Take a look at the parts list and ensure you have all the items to build.
2. You will also need a Philips head screwdriver.
3. Please refer to the parts list in the manual.
4. Protect and place the car on a flat surface.
5. Secure the rear bracket with screws.
6. Thread the multiplug wire attached to the motor through the hole in the body of the car.
7. Line up the motor with the axle and the hole in the body of the car.
8. For the rear wheels, ensure the assembly order of the hardware is as follows – wheel – washer – & finally the nut.
9. Attach the rear wheel trim to the relative gaps on the wheel.
10. Repeat the process on the other side.
11. For the front wheels, ensure the assembly order of the hardware is as follows – wheel – bush – washer – & finally the nut.
12. Attach the front wheel trim to the relative gaps on the wheel.
13. Repeat the process on the other side.
14. Connect the battery terminal & the motor multiplugs.
15. Once the battery terminals are connected, check to see if the car powers up.
16. Connect the steering wheel wire to the multiplug protruding from the steering console.
17. Ensure the wire is threaded back through the console once connected to prevent damage.
18. Attach the steering wheel to the steering rod.
19. Attach the rear windshield to the relevant gaps on the back of the car.
20. Secure the rear windshield with screws.
21. Attach the front windshield to the relevant gaps on the bonnet.
22. Secure it with screws.
23. Repeat the process on the other side.
24. Line up the engine cover with the relevant gaps in the front of the car.
25. Secure the engine cover by twisting the caps on either side.
26. Attach the front bonnet as shown.
27. Line up the seat as shown.
28. Secure the seat by twisting the pins on either side.
29. Attach the side windows to the relative gaps on the doors.
30. Secure the side windows with screws.
31. Repeat the process on the other side.
32. Attach the side door panels to the relevant gaps on the side doors.
33. Repeat the process on the other side.
34. Attach the wing mirror by pushing into place until you hear a click.
35. Repeat the process on the other side.
► If you need help choosing a ride-on toy for a present, then check us out @ [ Ссылка ]
►Subscribe: [ Ссылка ] to see more videos on our ride-on toys.
►Find us on Facebook: [ Ссылка ]
#RangeRoverVogue #kidsevogue #rangerovervoguerideoncar
