Click that SUBSCRIBE button for more great content!
You can install our Thermal-Ties (or most manufacturer’s stainless ties) using common tools already in your tool box. All you need is a pair of diagonal pliers, needle nose pliers or bent needle nose pliers.

It’s easier to start by loosely wrapping the locking tie around the pipe. Slide over your insulation, then hand tighten. Trim most of the tie off, leaving you three quarters of an inch of a tab. Use the needle nose pliers to twist the tab down and back into the tie. Repeat that process one more time, and you are done!

▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬

0:00 - Intro
0:13 – Tools needed
0:32 – Pre-install locking tie before tightening
0:46 – Put wrap or shield onto pipe
0:59 – Hand tighten tie to hold in place
1:32 – Cut and lock the ties into place
1:50 – Trick to hold ties into place
2:44 - Outro

See how easy that was, and you didn’t have to spend money on something that will just clutter up your toolbox.

🔔SUBSCRIBE HERE ►[ Ссылка ]
🛍 BUY LOCAL OR ONLINE HERE ►[ Ссылка ]

Products used in video:
[ Ссылка ]

Thank you for watching please like and share this video.
Heatshield Products, Inc.

свернуть