For more information visit [ Ссылка ]

Looking to perform a soundcheck using your BLX Wireless System? Watch our video here to find out how: [ Ссылка ]
0:00 - How to Set Best Channel
0:10 - Preparation
Connect and turn on receiver
Keep the transmitter off

0:26 – Setting Up a Single Channel System
Press group to scan for best group and channel
Turn on the transmitter
Set it to the same group and channel
The single channel system is now ready to use

1:17 – Setting up a Multiple Channel System
Tip: BLX systems must be in the same frequency band for this procedure
Contact Shure for more information on band variations and frequency coordination
To setup another BLX receiver, keep the original receiver and transmitter on
Press and hold the group button on the next receiver until the display flashes then press group to select the same group
The receiver automatically performs a channel scan and selects the best available channel
Turn on the next transmitter
Set to the same group and channel as the receiver
Tip: Place BLX4 receivers side-by-side. Do not stack on top of each other
When using a BLX88 receiver,The group scan sets up both channels at the same time

2:54 Checklist
Ready LED on receivers - green
All receivers set to the same group

свернуть