Many times air pressure doesn’t develops in the sprayer or water droplets come out from the nozzle , so here is the solution for it.

Make sure all the fixtures are kept tight properly .

OPERATION INSTRUCTION
1. Check if the screw cap is firmly closed, the pipe below is attached and the nossel is kept tight.
2. Fill the high pressure sprayer with liquid as far the line and close the screw cap (avoid filling excess quantity of liquid otherwise the sprayer develops insufficient pressure)
3. Pump until resistance is felt (approximately 15 strokes).
4. Engage trigger for spraying .

ATTENTION
After use , spin the top a quarter turn to release the remaining pressure. Do not store when pressurized.

свернуть