DIY Tumbler Turner for less than $20. Quick and easy to make for someone who does not have a lot of tools or workshop.
(1) 6 ft long 1x6 board at Home Depot. Ask for them to cut it for you. 6ft Board is enough to make two cup turners
(2) 20” long pieces
(4) 5” long pieces
(1) 1/2”pvc precut 2ft piece. Use a hacksaw to cut into 6” pieces. This enough for two cup turners
(4) 1/2”pvc 6” long.
(1) 1/2 pvc slip cap
(1) 1/2 pvc male adapter
(1) 1/2 pvc female adapter.
(1) replacement lamp cord
(1) synchronous motor 100-127 VAC
(1) 7 mm flexible coupling connector
(1) M4 x 8 screw
(1) foam football
Total materials cost with wood and pvc pipe remaining to make another one turner should be less than $20
Other items needed
7/8” Forstner Bit
5/32” drill bit
3/32” drill bit
Drill
Hacksaw
Clamp
Wood glue
4 wood screws
Pencil
Ruler or straight edge
