BUY THE AUTO PARTS you need for the operation : 👉 [ Ссылка ] 👈
📱 DOWNLOAD THE APP : 🍎 [ Ссылка ], 🤖 : [ Ссылка ] 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
- Brake cleaner : [ Ссылка ]

- Clutch kit : [ Ссылка ]

- Clutch screws : Go to a Peugeot dealer

- Gear grease : [ Ссылка ]

- Gearbox oil : [ Ссылка ]

💪 TIGHTENING TORQUES FOR CLUTCH KIT PEUGEOT 207 1.4 8V
- Clutch screws : 20 Nm
- Gearbox retaining screws : 55 Nm
- Gearbox bracket screws : 30 Nm
- Gearbox bracket screw on engine : 60 Nm
- Starter retaining screws : 20 Nm
- Screw at the driveshaft on the gearbox : 55 Nm
- Screw that connects the exhaust line to the engine : 55 Nm
- Screws on the anti-tilt motor mount : 60 Nm
- Clutch sender screws : 30 Nm
- Metal crossbar back screws : 95 Nm
- Screw connecting the half-cradle to the cradle : 95 Nm
- Control arm ball joint nut : 44 Nm
- Hub nut : (72mm) 245 Nm, (82mm) 310 Nm
- Anti-jamming bar screws : 75 Nm

Clutch kit on a Peugeot 207 1.4 8V.

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your 207 : [ Ссылка ] 🏆🤖💣

- 30mm socket
- Torx E16 socket
- 6mm Allen socket
- 10mm spanner
- Small socket wrench
- Socket wrench
- Flat head screwdriver
- Wheel lug wrench
- 10mm socket
- 13mm socket
- 16mm socket
- T-handle wrench
- Extender
- Pin punch
- Piece of tissue
- Hammer
- 17mm Offset wrench
- Crowbar
- Chisel
- Ring spanner
- 8mm Allen socket
- Torque wrench: [ Ссылка ], [ Ссылка ], [ Ссылка ]
- Clutch alignment system: [ Ссылка ]

🔝💪Safely lift your 207 with the hydraulic jack: [ Ссылка ] and axle stands: [ Ссылка ] recommended by UseTool EN 💪🔝

- Hydraulic jack
- Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
When you change a clutch, it is important to also replace the clutch release bearing.

Usetool's info
- In order to reinstall the clutch on the flywheel, the clutch disc and housing need to be perfectly centred.
It is therefore imperative that you have a clutch centring tool, something you can find in the description of the video.

- Changing the clutch requires to remove both cardan shafts.
The gearbox must therefore be bled, so that oil does not spill everywhere.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : [ Ссылка ]

- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : [ Ссылка ]

- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : [ Ссылка ]

- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : [ Ссылка ]

- How to replace the car battery Peugeot 207 1.4 16V 🔋 : [ Ссылка ]

- Change the gearbox oil Peugeot 207 1.4 8V 🛢 : [ Ссылка ]

- How to replace the Flywheel Megane mk2 1.5 dCi 🚗 : [ Ссылка ]

- [ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 : [ Ссылка ]

Space Race by tubebackr | [ Ссылка ]
Music promoted by [ Ссылка ]

Terms and conditions of the offer : [ Ссылка ]

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:15 Remove engine compartment components
3:40 Remove components from under the vehicle
8:42 Remove the gearbox
12:50 Remove the clutch
13:32 Install the new clutch
15:47 Replace the clutch release bearing
16:49 Refit the gearbox
18:35 Putting the elements back in place

свернуть